Maryland DOT inspection requirements say every truck, trailer or passenger vehicle used for business and rated 10,001 lb or more must pass a DOT inspection at least once every 12 months, with proof kept on the vehicle.
Maryland-registered trucks can meet this through the state’s Preventive Maintenance Program, which can also make a truck due sooner by mileage.
Key takeaways
- Any truck or trailer used for business and rated 10,001 lb or more needs a DOT inspection at least once every 12 months.
- Maryland’s own program can make a truck due sooner, at 25,000 miles for most vehicles.
- A tractor and every trailer it pulls each need their own separate inspection.
- Missing inspection proof gets you a citation and a hit to your safety score, but almost never an automatic out-of-service order.
- A passing Maryland program inspection counts as your federal annual inspection.
I’ve been working on trucks for about 15 years. Most of the annual inspection problems I run into have nothing to do with an unsafe truck.
A date slips, a trailer gets forgotten, or the paperwork is sitting in the office when an officer asks for it. The rules are simple, but they’re strict.
Here’s what applies to your Maryland fleet, in the order I’d walk you through it in your yard.
Who needs an annual DOT inspection in Maryland?
Your vehicle needs an annual DOT inspection if it’s used for business and it does any one of these:
- Weighs 10,001 lb or more, by weight rating or actual weight, whichever is higher
- Carries 9 or more people for pay, including the driver
- Carries 16 or more people, paid or not, including the driver
- Hauls hazmat in amounts that need placards
Meet any one of those and it’s a commercial motor vehicle under the federal definition.
That 10,001-lb line catches a lot of fleets off guard. Plenty of box trucks, service bodies and pickups pulling trailers are over it.

Staying inside Maryland doesn't get you out of it
I hear this one a lot: “My trucks never leave the state.” It doesn’t matter.
Maryland applies the same federal safety rules to in-state carriers, and that includes trailers and converter dollies.
Every trailer needs its own inspection
The federal rule treats each vehicle in a combination as its own commercial vehicle.
So a tractor and a semitrailer need two inspections. Hook up a second trailer and you’re at three.
All it takes is one forgotten trailer to get cited at roadside.

Maryland's state inspection is a different thing
Fleet managers mix these two up all the time, so I’ll take them one at a time.
The used-car safety inspection
Maryland has no yearly inspection for passenger cars.
A used car gets a one-time Maryland safety inspection before it’s titled, usually after a sale. It has nothing to do with the annual commercial inspection.
Maryland's commercial program
For commercial vehicles, Maryland runs a Preventive Maintenance Program.
It covers trucks over 10,000 lb registered weight, truck tractors, freight trailers and larger buses.
In 2008 the federal safety agency, FMCSA, listed Maryland’s program as equal to the federal one.
That means one passing Maryland program inspection can count as your federal annual inspection. It’s good for 12 months, counted from the end of the month it was done.

Watch the odometer, not just the calendar
Maryland’s program runs on its own clock, set by Maryland’s inspection-interval law.
Each vehicle is due at whichever comes first:
| Vehicle | Miles | Or time |
|---|---|---|
| Most covered vehicles | 25,000 | 12 months |
| Truck tractors, 5 years old or newer | 35,000 | 12 months |
| Zero-emission and fuel-cell trucks, 5 years old or newer | 50,000 | 12 months |
| Dump service trucks 18 years old or more | 12,500 | 6 months |
A truck that runs a lot of miles can come due months before its 12-month date.
The state’s older regulation still lists only the 25,000-mile rule. Go by the newer law.
Trucks registered in other states still need an inspection that meets the federal rule.

What the inspection checks

The inspector works through the federal minimum inspection standards.
Find one listed defect and the vehicle doesn’t pass.
These are the systems we check:
- Brakes
- Coupling devices
- Exhaust and fuel systems
- Lights and reflectors
- Safe loading
- Steering
- Suspension and frame
- Tires, wheels and rims
- Windshield and wipers
- Rear impact guards, plus seating on motorcoaches
These standards used to be called “Appendix G,” and you’ll still see that name on older checklists.
Brakes fail the most

Those numbers come from the 2025 International Roadcheck results. Roadcheck is a yearly inspection blitz run by the Commercial Vehicle Safety Alliance.
If you only have time to check one thing before inspection day, make it the brakes.
Free download: Annual DOT inspection checklist
Walk every truck through the same items the inspector will check, before they do.
Who can do the inspection?
It has to be a qualified inspector.
There’s no federal “DOT certification” for inspectors. The person has to know the federal inspection standards and the tools to check them.
They also need one of these:
- A federal or state training program, or a state certificate
- At least one year of combined training and experience
You, the carrier, have to keep proof of the inspector’s qualifications. Keep it for as long as they inspect for you, and for one year after.
Two of our technicians trained as inspectors while working at Revit, and they’re the ones out doing our annual inspections. Every technician here is salaried, so nobody earns more because your truck failed.
What proof to keep, and for how long
You need proof in two places.
- On the vehicle: a copy of the report, or a decal. The decal must show the date, the carrier’s name and address, the vehicle ID, and that it passed.
- On file: the full report, kept for 14 months under federal rules, where the vehicle is housed or maintained.
Maryland’s program asks for more. It requires two years of records where the vehicle is garaged or maintained.
My rule for Maryland fleets: keep every inspection report for two years.

What happens if an inspection is missing or expired?
A lot of guides say a missing inspection means an automatic out-of-service order. That’s wrong.
An out-of-service order means the truck can’t move until the problem is fixed. Missing inspection proof almost never triggers one on its own.
We pulled DOT’s own roadside inspection data to check. From October 2023 to October 2026, officers wrote about 504,000 citations for missing inspection proof.
Only 97 of them were out-of-service violations.

In fiscal year 2025 alone, officers wrote about 170,000 of these citations.
It still costs you
Missing proof still causes problems. Here’s what can follow:
- A hit to your safety score. The violation counts against your Vehicle Maintenance score in FMCSA’s CSA program, which decides which carriers get investigated.
- A closer look at the truck. Officers often keep checking, and real defects they find can put the truck out of service.
- No grace period. Once 12 months pass, the vehicle can’t legally run until it passes a new inspection.
The fines
Federal fines can follow too. Under the current federal penalty schedule:
| Violation type | Maximum fine |
|---|---|
| Safety rule violation (non-recordkeeping) | Up to $19,246 each |
| Recordkeeping violation | Up to $1,584 per day, max $15,846 |
Which one applies depends on how the officer writes it up.
The fine is rarely what hurts most. A parked truck, a missed job and a worse safety record usually cost you more.
Annual inspection rules at a glance

Onsite inspection or a trip to the shop?
Most Maryland fleets handle this one of two ways. They drive each truck to a shop, or they bring the inspector to the yard.
| What matters | Onsite at your yard | Driving to a shop |
|---|---|---|
| Location | Where the trucks are parked | You drive each truck in |
| Driver time | Drivers stay on their routes | One driver per trip, often hours |
| Several trucks | Done in one visit | One at a time, several trips |
| Failed items | Often fixed the same visit | May need a second appointment |
With several trucks due, the driving back and forth often costs more than the inspections.
That’s why a lot of fleets book onsite DOT inspections at their yard.
Common mistakes that get Maryland fleets cited
- One due date for the whole fleet. Every truck and every trailer runs on its own clock.
- Watching the calendar and ignoring the odometer. A high-mileage truck can hit 25,000 miles long before 12 months.
- Leaving proof in the office. The report or decal has to be on the vehicle.
- Sending out a truck with a known defect. A problem your driver already reported looks a lot worse at roadside.
- Splitting inspection and repair. A failed item that doesn’t get fixed turns into your next violation. Regular on-site preventive maintenance catches most of these early.
How to prepare for a DOT inspection
If you rely on memory or good intentions, you’ll miss a truck eventually. You fall to the level of your system, so build one.
- Train drivers on daily pre-trip checks, and make it safe to report. A lot of drivers keep quiet about a problem because they think they’ll get in trouble. Tell them a report helps you fix the truck faster, and you’ll hear about defects before an officer finds them.
- Track each vehicle’s due date separately. Set a reminder a month ahead, and make one person responsible for it.
- Keep proof where it belongs. The report or decal goes in the truck, and past reports go on file.
- Fix defects before dispatch. Mobile truck repair can fix many of them right where the truck is parked.
- Book inspection and repair together. A failed item shouldn’t cost you a second trip.
Free tool: Maryland DOT compliance calendar
Track every truck’s and trailer’s due date, by month and by mileage, in one place.
What fleet managers say
“Revit’s service is a gem to the community and will make your commercial vehicle operation flourish. The value they provide goes far beyond other auto vendors. They will work with you to custom tailor what you need to be successful.”
Daniel Allison, Fleet Manager, 40-vehicle fleet including box trucks · ★★★★★ Google review
Revit Auto is rated 5.0 from 120 reviews on Google.
Example: six trucks due in the same two weeks
Say you’re a Montgomery County contractor with six trucks, and all six come due in the same two-week window.
Sending them to a shop means six trips and a driver off the road each time. That’s days of downtime, spread out over two weeks.
An onsite visit works differently. A qualified inspector comes to your yard and works through all six trucks where they’re parked.
Small brake or lighting defects get fixed the same day. The trucks go back out with fresh reports, and nobody loses a day driving to a shop.
Stay compliant without the shop runaround
Meeting Maryland’s DOT inspection requirements comes down to a simple system.
Track each vehicle, keep proof in every cab, and bring the inspection to your trucks.
We do mobile DOT inspections in Maryland right at your yard. We also handle maintenance and repairs across Maryland, DC and Northern Virginia.
Free Maryland fleet compliance resources
| Resource | What it helps you do |
|---|---|
| Annual DOT inspection checklist (download) | Pre-check every truck against the inspector’s list |
| Maryland DOT compliance calendar (tool) | Track due dates by month and mileage |
| DVIR guide (guide) | Set up daily driver inspection reports |
| Maryland PM Program guide (guide) | Understand Maryland’s state inspection program |
| Hours of Service and ELD rules (guide) | Stay legal on driver hours |
Frequently asked questions
How often does a commercial vehicle need a DOT inspection in Maryland?
At least once every 12 months, under the federal annual inspection rule.
Under Maryland’s program, most vehicles are also due at 25,000 miles if that comes first. Dump service trucks 18 years or older are due every 6 months or 12,500 miles.
Is a Maryland state inspection the same as a federal DOT inspection?
Not always. The used-car safety inspection is a separate thing.
A passing inspection under Maryland’s Preventive Maintenance Program does count as the federal annual inspection.
What happens if my DOT inspection has expired?
You can’t legally use the vehicle until it passes a new inspection.
At roadside, expect a citation that hurts your CSA score, and maybe a fine. By itself, it’s rarely an out-of-service order.
Do trailers need their own DOT inspection?
Yes. The tractor and every trailer each need their own annual inspection and their own proof.
Who is allowed to perform the inspection?
A qualified inspector who knows the standards and the tools. They need training, a state certificate, or at least a year of experience.
There’s no federal “DOT certification.” The carrier has to keep proof of the inspector’s qualifications.
How long do I need to keep the inspection report?
At least 14 months under federal rules. Maryland’s program requires two years, so I’d keep them for two years.
Can Revit Auto do the inspection at our location?
Yes. We do annual DOT inspections at your yard across Maryland, DC and Northern Virginia.
We can usually fix failed items during the same visit.
Explore more compliance guides
- Annual DOT inspection checklist: what inspectors check
- DVIR: what it is and when to file one
- Maryland’s Preventive Maintenance Program explained
- Hours of Service and ELD rules for fleets
- Maryland State Police roadside inspections: what to expect
- CSA Vehicle Maintenance BASIC: what it means for your fleet
This guide explains federal and Maryland rules for general information. It isn’t legal advice. Confirm current requirements with FMCSA or MDOT MVA before acting on them.
Sources
- Federal definition of a commercial motor vehicle (Cornell Law)
- Federal annual inspection rule (Cornell Law)
- Federal inspector qualifications (Cornell Law)
- Federal inspection record rule (Cornell Law)
- Federal minimum inspection standards (Cornell Law)
- Federal civil penalty schedule (Cornell Law)
- FMCSA list of states with equivalent inspection programs, 73 FR 63040 (Federal Register, October 2008)
- Maryland’s adoption of federal safety rules for in-state carriers
- Maryland PM Program coverage
- Maryland PM Program inspection intervals
- Maryland PM Program record rules
- Maryland inspection intervals by mileage and age
- Maryland used-vehicle safety inspection
- DOT Vehicle Inspections and Violations dataset (annual-inspection violation codes, queried October 6, 2026)
- CVSA 2025 International Roadcheck results (via AMTA, October 2025)
