Mobile Cooling System Repair for Fleets

Overheating can ruin an engine in one trip. We find cooling problems early and fix them at your lot.

Revit Auto service van with a tool cart, AC machine and generator beside client fleet vehicles

Can cooling system repairs be done on site?

Yes. Leaks, hoses, belts, thermostats and many radiator jobs can be done where the vehicle is parked.

If a truck is overheating, park it. Driving it hot can warp a head or ruin the engine.

Call (202) 827-5955 and we’ll come to it.

What we fix

Coolant leaks

Leaks traced to the hose, clamp, radiator, pump or gasket.

Hoses and clamps

Cracked, soft or swollen hoses replaced.

Radiators

Leaking or clogged radiators replaced.

Belts and pulleys

Serpentine belts checked for glazing, and pulleys for failing bearings.

Thermostats and pumps

Stuck thermostats and leaking water pumps.

Fans

Fan clutches and electric fans that don't pull enough air.

What we check

We check coolant with the engine off. We look for discoloration and for oil or fuel mixed into it, which can point to a bigger problem.

We look at the serpentine belt for glazing. Debris on a smooth pulley usually points to a failing bearing.

We check hoses, clamps and the radiator for leaks, then run the engine to watch the temperature and the fans.

Small problems like seepage go in the report as items to watch, so you can plan the repair.

Signs of a cooling problem

  • The temperature gauge climbing, or an overheating warning.
  • Coolant on the ground or a sweet smell.
  • Coolant level dropping between checks.
  • Steam from under the hood.
  • Heater blowing cold in winter, which can mean low coolant or a stuck thermostat.
  • A squealing belt.

A level that keeps dropping with no leak in sight needs a closer look, because coolant is going somewhere.

What decides the time and cost

  • Where the leak is. A hose clamp is quick; a water pump or radiator takes longer.
  • Whether the engine overheated. Running hot can damage more than the part that failed.
  • Coolant type. We refill with the type the engine maker calls for.
  • Access. Some engines need more parts removed to reach the pump or thermostat.

We confirm the cause first, then give you the estimate.

Prevent it with regular checks

We check coolant, hoses and belts at every PM visit. Most cooling failures show warning signs first.

Cold weather adds its own risk. See the winter fleet prep checklist. For summer, check AC repair too.

Cooling problems by season

Summer heat, heavy loads and long idling push cooling systems hardest. A weak fan or a partly clogged radiator often shows up first in traffic on a hot day.

Winter brings a different risk. Coolant that is too weak can freeze, and a stuck thermostat leaves the heater blowing cold.

That is why we check coolant condition and strength at every PM visit, not just the level.

What to do before we arrive

  • Turn the engine off if the temperature is high, and let it cool.
  • Never open the radiator or coolant cap on a hot engine. The coolant is under pressure and can burn.
  • Note where any puddle is and what color it is. Coolant is often green, orange or pink.
  • Tell us if the heater has been blowing cold, or if anyone has been topping up the coolant.

Vehicles we work on

We work on the vehicles fleets actually run: Sprinter and Transit vans, pickups, box trucks, dump trucks and tractors.

We service gas and diesel, across makes. Contractors, delivery and service fleets are most of our work.

If a repair needs shop equipment we don’t carry, we tell you up front and plan it with you.

What our customers say

★★★★★
"They do preventive maintenance and maintenance on our snow blowers, generator and pick up truck. They show up timely to our appointments. They are friendly and professional."
Melissa Gallegos
Google review
★★★★★
"Blair kept my work vehicle on the road with quality parts and excellent craftsmanship. I'm sticking with Revit Auto to help my business grow."
Adam Bell
Google review

Cooling system FAQ

No. Park it and turn it off. Driving hot can warp the head or damage the engine.

There is a leak somewhere, inside or outside the engine. We trace it before we replace parts.

Often, yes, depending on the vehicle. We tell you up front if it needs a shop.

It can point to a failed gasket or cooler. We test to find the source.

We cover Montgomery, Frederick, Howard, Carroll, Prince George’s and Anne Arundel Counties, Washington, DC, and Fairfax and Loudoun Counties in Virginia. See all service areas.

Get your truck fixed where it sits

Call (202) 827-5955 or book a fleet consultation. We serve Montgomery, Frederick, Howard, Carroll, Prince George’s and Anne Arundel Counties, Washington, DC, and Fairfax and Loudoun Counties in Virginia.

Fleet Support

202-827-5955

Shop Location

Damascus, MD 20872 US

Claim Free 30-Minute Fleet Consultation

Get your free copy

Your Summary is Ready!