Mobile Brake Repair for Fleet Trucks and Vans

We fix fleet brakes at your lot or job site, from Sprinter pads and rotors to air brake shoes, drums and slack adjusters.

Revit Auto technician working under the hood of a fleet pickup in a client parking lot, with the Revit service van

Can a mobile mechanic fix truck brakes on site?

Yes. Most brake jobs on fleet vans, pickups and box trucks can be done right where the vehicle is parked.

We bring the parts and tools to your lot. Your drivers keep working while we do the job.

If a truck is grinding, pulling or showing a brake warning, park it and call us at (202) 827-5955. Don’t run it another shift.

What we fix

Pads and rotors

Pads, rotors, calipers and hardware on vans, pickups and light-duty trucks.

Air brake shoes and drums

Shoe life, drum scoring and replacement on box trucks and tractors.

Slack adjusters and chambers

Automatic slack adjusters greased and moving, brake chambers checked and covered.

Lines and hoses

Brake hoses and lines checked for chafing, leaks and rust.

Air system

Air tanks drained. Water in them means the air dryer needs service.

Warning lights

ABS and brake codes scanned and traced to the real cause.

How we do a brake job at your location

  1. We talk to the driver first. We ask what they hear and feel, and when it started.
  2. We check the paperwork and the last service, so we know what was done before.
  3. We measure shoe or pad life and look at the drums or rotors for scoring.
  4. We keep our hands clean on brake parts. Grease on brake parts cuts braking.
  5. We check that slack adjusters are greased and moving, and that chambers have covers.
  6. You get a digital report with photos before and after the work.

Signs your fleet truck needs brake work

  • Grinding or squealing when the driver stops.
  • The truck pulls to one side under braking.
  • A soft or low pedal, or a pedal that sinks.
  • Air brakes that are slow to build pressure or slow to release.
  • An ABS or brake warning light on the dash.
  • Shaking in the wheel or pedal, which often points to rotors or drums.

Grinding usually means the friction material is gone and metal is on metal. That turns a pad job into a rotor or drum job fast.

What decides the time and cost of a brake job

We give you an estimate after we inspect, not before. These are the things that move it.

  • Hydraulic or air brakes. Vans and pickups use pads and rotors. Most box trucks and tractors use shoes, drums and air.
  • How far the wear went. Caught early, it is pads or shoes. Run too long, it adds rotors, drums or calipers.
  • Axles. Front only, rear only, or both.
  • Hardware and hoses. Seized slides, rusted lines or leaking chambers add parts.
  • Parts availability. Common van and truck parts we can usually get the same day.

Brakes and your DOT inspection

Brakes are one of the 15 categories on the annual DOT inspection, and they are a common reason trucks get put out of service at the roadside.

See what inspectors check in our annual DOT inspection checklist, and what happens at a stop in Maryland roadside inspections.

Want brakes caught early? Our mobile fleet maintenance checks them at every service, and we can run your DOT inspection on site.

Vehicles we work on

We work on the vehicles fleets actually run: Sprinter and Transit vans, pickups, box trucks, dump trucks and tractors.

We service gas and diesel, across makes. Contractors, delivery and service fleets are most of our work.

If a repair needs shop equipment we don’t carry, we tell you up front and plan it with you.

What our customers say

★★★★★
"I called revit and told them that my brakes were grinding a little. I spoke with the owner Blair and he told me that it sounded like my rear brakes were shot. He came out the very next day with the parts and replaced the rear brakes and rotors at my house. He also checked all around the car to see if there was anything else. Who does this with this great service. I would highly recommend them if you want a great and adorable job."
Darryl Russo
Google review
★★★★★
"I have a 1997 Ford F-250 HD work truck, that lost almost all brake capabilities on the way home from a long distance trip. I was lucky, and barely able to get the truck home. Revit auto was referred by a work associate. I called at 9am and they came out the same day to start the process of servicing my truck. Blair, the owner of the company personally did the initial on-site inspection. Could not have been more impressed by the timelines and consideration of the owner. As well as his willingness to walk me through exactly what needed to be done. Scheduling the service was seamless. And they even fixed the side mirror on my Honda Civic. Can’t express my gratitude enough, for the convenience of being able to call a service that comes to you. I was able to leave both vehicles on my home site for repairs and not lose any time tending to my own businesses. Highly recommend these guys."
M.D. Lubel
Google review

Brake repair FAQ

Most pad and rotor jobs on a van take a couple of hours. Air brake work on a box truck takes longer, depending on parts.

Yes. We service shoes, drums, slack adjusters, chambers and the air tanks on box trucks and tractors.

Yes. We work at your lot or job site, so your crew keeps working and the truck is back in service sooner.

Yes. Every PM visit includes a brake check: shoe or pad life, drums or rotors, slack adjusters, chambers and hoses.

We cover Montgomery, Frederick, Howard, Carroll, Prince George’s and Anne Arundel Counties, Washington, DC, and Fairfax and Loudoun Counties in Virginia. See all service areas.

Get your truck fixed where it sits

Call (202) 827-5955 or book a fleet consultation. We serve Montgomery, Frederick, Howard, Carroll, Prince George’s and Anne Arundel Counties, Washington, DC, and Fairfax and Loudoun Counties in Virginia.

Fleet Support

202-827-5955

Shop Location

Damascus, MD 20872 US

Claim Free 30-Minute Fleet Consultation

Get your free copy

Your Summary is Ready!